Bending patch fitting
- NRB
- China
- 1-30days
Patch Fitting is a hardware fitting used to clamp glass doors with ground springs or shafts to make the doors run normally. It is widely used in glass doors and Windows, bathroom doors, and shower rooms. Glass door clamps are clamps fixed to the edge of the door to install other components. Usually, the Patch Fitting is mostly 201,304 stainless steel. Divided into two halves, the door plate is clamped in the installation, and the door clamp is tightened through the screw, so that it clamps the door plate, fixed on the door, easy to install other parts.
Aluminum Pivot L Shape Bending Overpanel Patch Fitting
INTRODUCTION
The bending-over panel patch fitting is fixed on the edge of the door, and the patch fitting can be divided into the upper clamp, lower clamp, top clamp, curved clamp, lock clamp, and special-shaped door clamp. Clamps for mounting other parts. The Patch Fitting is mostly 201,304 stainless steel. Divided into two halves, the door plate is clamped in the installation, and the door clamp is tightened through the screw, so that it clamps the door plate, fixed on the door, easy to install other parts.
The material can be divided into 304,201 shell surface treatments: mirror light, sanding, titanium gold, sand gold, rose gold, etc., according to customer needs can also oxidize a variety of surface treatments. Door clamp castings generally use three kinds of materials: iron, aluminum, and stainless steel, aluminum, iron parts are the most widely used, and aluminum parts have the highest price, use the best effect, and service life. Pad paper according to the material can be divided into paper pads, asbestos pads, non-asbestos pads, and rubber pads four kinds. The lock pad paper is 1.0mm, 1.2mm, 1.5mm, and the others are 2mm.
Product parameter
We will be launching our products globally. Please make your recommendation for marketing efforts....more